Function Led - Icom IC-F6011-67 Instruction Manual

1
PANEL DESCRIPTION

■ Function LED

1
q CHANNEL INDICATORS
➥ Indicates the operating channel.
➥ Blinks when receiving a signal during a scan.
➥ All LEDs blink while entering the power ON password.
w TX/RX INDICATOR
➥ Lights red while transmitting.
➥ Lights green while the channel is busy (receiving).
➥ Blinks orange when the specified 2-tone, 5-tone call is
received.
➥ Alternately blinks green and red when a cloning error
has occurred.
e ACTIVATED KEY INDICATORS (P0/P1/P2)
Lights when a pre-programmed key function is activated.
NOTE: When the supplied DC voltage is high, all LEDs
blink. Check the DC voltage.
2
q
2 3 4
TX/RX
e
D MICROPHONE
The supplied or optional microphone has a PTT switch and
a hanger hook.
• The following functions are available when the microphone is ON or
OFF hook (depending on the preprogramming):
- Automatic scan start when you put it ON hook.
- Scan is cancelled when you take it OFF hook
- Scan is paused when you take it OFF hook
w - Automatically selects the Priority A channel when you take it OFF
hook.
- Sets to 'Inaudible' mode (muted state) when you put it ON hook.
- Sets to 'Audible' mode (unmuted state) when you take it OFF
hook.