Operation - Icom CY-5300 Instruction Manual

4

OPERATION

■ Turning power ON
➀ On rear panel, toggle AC Power Switch up to
turn AC power ON.
■ Receiving and transmitting
Receiving

➀ When receiving a signal, RX indicator turns
ON. No audio is output from the repeater.
A subscriber unit will be required to hear
the audio.
Transmitting for Local Control

➀ Take the microphone off hook.
➁ Wait for the channel to become clear.
➂ Push and hold [PTT] to transmit, then
speak into the microphone at your normal
voice level.
➃ Release [PTT] to receive.
IMPORTANT:
To maximize the readability of the transmitted
signal:
➀ Pause briefly after pushing [PTT].
➁ Hold the microphone 1 to 2 inch (2.5 to
5 cm) from your mouth, then speak into
the microphone at a normal voice level.
8