Asko T411VD.T.U Instructions For Use Manual page 25

STEP 7:
END OF PROGRAM
Cycle completed succsessfully
Anti
creasing Cycle completed succsessfully
Cycle completed succsessfully
Open the door towards you and remove the laundry from the dryer.
Make sure the dryer drum is empty, then close the door.
If you do not do anything for 5 minutes after the end of the program, the display will switch off to standby
mode in order to save power.
The display will light up again if you press the ON/OFF button or open the dryer door.
After each drying cycle, clean the net fi lter in the door and empty the condensate tank. See chapter
"CLEANING AND MAINTENANCE".
A clogged net fi lter may result in activation of the automatic overheating switch-off device. Clean the
fi lter, wait for the machine to cool down, and try running it again. If the dryer still fails to start, call a service
technician.
After the drying process, unplug the dryer power cord from the power outlet.
Clean door filter
Customer Care Center, 1-800-898-1879, www.askousa.com
After the end of the drying program, the
Start
new
display will indicate that the program has
been successfully completed ("Cycle
completed successfully").
If you have selected the "anti-crease"
option, the dryer will continue to operate
after the end of the drying cycle for the
amount of time specifi ed upon selection
of this program setting.
After the drying cycle, store the program
Start Add
new fav
(see "Favourite programs").
5 6
Clean the net fi lter in the door
OK
(see chapter "CLEANING AND
MAINTENANCE").
6
25