Table of Contents
Advertisement
General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to
use this feature.
A zone is a group of channels. The following methods
are options on how to select a radio zone. The result
of all the methods is the same. You can use the
options interchangeably depending on your
preference and the programmed functions.
•
Select a zone via the Mode Knob:
a) Rotate the Mode Knob until the display shows
the desired zone.
Select a zone via the radio menu Zone:
•
a)
or to Zone and press the Menu Select
button directly below Zone.
b)
or
keypad to enter the zone number.
If the zone number entered is unprogrammed,
the display shows Invalid entry. Repeat this
step.
48
English
to the required zone, or use the
c) Press the Menu Select button directly below
Select to confirm the displayed zone.
d) Press the PTT button to transmit on the
displayed zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following
methods are options on how to select a radio
channel. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
•
Select a channel via the Mode knob:
a) Rotate the Mode knob until the display shows
the desired channel.
b) Press the PTT button to begin transmitting on
the displayed channel.
Select a channel via the radio menu Channel:
•
a)
or to Channel.
b) Press the Menu Select button directly below
Channel.
Advertisement
Table of Contents
