Table of Contents
Advertisement
General Radio Operation
This chapter explains the general radio operations in your
radio.
Selecting a Zone
Your radio must be preprogrammed for you to use this
feature.
A zone is a group of channels.
NOTICE:
Any reference to Zone Select Switch refers to Zone
Select using the Menu.
Do one of the following to select a radio channel. You can
use these options interchangeably depending on your
preference and the programmed functions.
•
Select a zone using the preprogrammed Zone (3-
Position A/B/C) switch:
a. Move the preprogrammed Zone (3-Position
A/B/C) switch to the position of the required
zone.
If the zone number entered is unprogrammed, the
display shows Invalid entry. Repeat this step.
b. Press the PTT button to transmit on the displayed
zone channel.
•
Select a zone using the radio menu Zone:
a.
or to Zone and press the Menu Select button
directly below Zone.
b.
or
to the required zone.
c. Press the Menu Select button directly below Sel
to confirm the displayed zone.
d. Press the PTT button to transmit on the displayed
zone channel.
•
Select a zone using the radio menu ZnUp or ZnDn:
a.
or to ZnUp or ZnDn.
b. Press and hold the Menu Select button directly
below ZnUp or ZnDn until the required zone
appears.
English
57
Advertisement
Table of Contents
