External Alarms (Horn And Lights) - Motorola APX MOBILE O9 CONTROL HEAD User Manual

• Response Selector
• Directional Buttons
• Top/Bottom Programmable Buttons
URC also supports Action Consolidation feature to
run the lightbar.
Consult a qualified radio technician for details on
customizing different relay patterns using the radio's
programming software.

External Alarms (Horn and Lights)

All control heads can be equipped for external alarms
(horn and lights) that are activated when a Call Alert
page, Private Conversation call, or phone call is
received.
The radio always powers up with the horn and lights
feature enabled.
Note:
The horn and lights feature must be enabled
by a qualified radio technician.
Using Non-Permanent Horn and Lights
1 Press the Menu Select button directly below H/L
momentarily.
146
English
The last selected alarm(s) are enabled, and the
display shows the enabled alarm(s) alternating
with the selected mode, until it is turned off.
2 Press the Menu Select button directly below H/L
momentarily to turn off the alarm(s).
The display shows Horn/Lites off.
Using Permanent Horn and Lights
If Permanent Horn and Lights is enabled, horn and
lights will automatically turn on when the radio powers
up.
1 Press the Menu Select button directly below H/L
once to turn off the alarm(s).
2 Press the Menu Select button directly below H/L
momentarily to enable the last selected alarm(s).
The display briefly shows the enabled alarms, and
then reverts back to the selected mode.
Changing the Selected Alarms
1 Press the Menu Select button directly below H/L
until the display shows the required alarm.
2 or to required selection.