Sony HXC-FB75 Operating Instructions Manual page 18

Hd color camera
Table of Contents

Advertisement

Adjusting the diopter
Rotate the diopter adjustment ring until the viewfinder image is
sharpest.
Diopter adjustment ring
Adjusting the screen
You can adjust the following items.
Peaking: Adjust using the PEAKING knob.
Contrast: Adjust using the CONTRAST knob.
Brightness: Adjust using the BRIGHT knob.
Screen display mode and indicator
The viewfinder screen can be set to full-screen display mode or
reduced display mode.
To switch the display mode, switch the DISPLAY switch "ON t
OFF t ON t OFF" or "OFF t ON t OFF t ON" in quick
succession.
Full-screen display mode
Displays the image so that it fills the full-screen display area.
Tally and other indicators are superimposed on the camera image.
Use this mode when the resolution of the displayed image is more
important.
Reduced display mode
Displays the camera image at a reduced size, with the tally and other
indicators displayed in the spaces above and below the camera
image.
Use this mode when the clear visibility of the tally and other
indicators is more important.
Indicators are located at the top and bottom of the screen to indicate
the status of the camera and viewfinder.
a G TALLY (green tally) indicator (green)
Lights up when a green tally signal is input.
b R TALLY (red tally) indicator (red)
Lights up when a red tally signal is input.
c Y TALLY (yellow tally) indicator (yellow)
Not supported by the camera.
Note
In full-screen display mode, the display position of the tally indicators is
fixed in one location. Accordingly, only one R/G/Y tally indicator can be lit
at any one time, regardless of the signal that is input. The display priority of
the tally indicator is red, green, and yellow, in that order.
d [!] indicator (amber)
Using the '!' IND function, the '!' indicator appears when non-
standard settings are in effect.
e BATT (battery) indicator (red)
Lights up or flashes to indicate the status of the power supply to the
camera.
Lit: Significant voltage decrease
Flashing: Voltage decrease
f SAVE indicator (amber)
Not supported by the camera.
18

Advertisement

Table of Contents
loading

Table of Contents