Table of Contents
Advertisement
t Memo
• The information is displayed in the viewfinder when 0
is pressed halfway, or during the meter operating time
(default setting: 10 sec.).
• The AF point in use for autofocus appears in red
(Superimpose AF Area) when 0 is pressed halfway.
You can turn this function off in [Superimpose AF Area] of
[Viewfinder Overlay] in the A5 menu. (p.26)
• You can adjust the viewfinder
image sharpness using the diopter
adjustment lever. If it is difficult to
move the diopter adjustment lever,
lift up and remove the eyecup.
Adjust the diopter setting until the
AF frame in the viewfinder looks
sharp and clear.
Electronic Level
You can check whether the camera is tilted by displaying
electronic levels. The electronic level for the horizontal camera
angle can be displayed in the viewfinder, and the electronic
levels for the vertical and horizontal camera angles can be
displayed on the Live View screen. (p.13)
Select whether to display the electronic levels in [Viewfinder
Overlay] and [Live View] of the A5 menu. (p.26)
Examples of Electronic Level in the Viewfinder
When level (at 0°)
When tilted 5° to the left
When held vertically and tilted 3° to the right
t Memo
• When [Electronic Level] is assigned to X or Y in [Button
Customization] of the A5 menu, you can turn the electronic
level display on or off by a simple button operation. (p.98)
1
19
Advertisement
Table of Contents
