Advertisement
and/or difficulty in loading and ejecting. If these problems
occur, check the bottom surface of the DVD. If the
surface of the DVD is damaged, such as cracked,
broken, or scratched, the DVD will not play properly.
If there is no apparent damage, try a known good DVD.
Notice: If you add any label to a DVD, insert
more than one DVD into the slot at a time, or attempt
to play scratched or damaged DVDs, you could
damage the DVD player. When using the DVD player,
use only DVDs in good condition without any
label, load one DVD at a time, and keep the DVD
player and the loading slot free of foreign materials,
liquids, and debris.
Do not add any label to a DVD, it could get caught in
the DVD player. If a DVD is recorded on a personal
computer and a description label is needed, try labeling
the top of the recorded DVD with a soft marker instead.
If an error appears on the display, see "DVD
Messages" later in this section.
Playing a DVD
There are three ways to play a DVD:
•
Once a DVD is inserted, the system will
automatically start play of the DVD.
•
If you are on a map screen, touch the
DVD screen button.
•
Press the AUDIO hard key, then touch
the DVD screen button.
O
(Power/Volume): Press this knob to turn the
system on and off. Turn the knob to increase or
decrease the volume of the audio system.
3-19
Advertisement
