Advertisement
To enter a destination by entering a cross street,
do the following:
1. Press the DEST hard key.
6
2. Select the
Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If five or less names are available, a list will display.
If more than five are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the desired street name with the correct
prefix from the list (Dr., Ln., St., etc.).
5. Once a street has been selected the Cross Street
screen button will become available. Select the
Cross Street button and start entering the cross
street name.
If five or less names are available, a list will display.
If more than five are available, there will be a
screen button with a number in it, it represents the
number of available cross streets. Select this
button to view the list.
6. Select the street name with the correct prefix from
the list (Dr., Ln., St., etc.). An Information screen
will automatically display.
7. Select the Go screen button. The map screen,
with the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See "Getting Started on Your Route" later in this
section for more information.
2-19
Advertisement
