Advertisement
To enter a destination by entering the street name first,
do the following:
1. Press the DEST hard key.
6
2. Select the
Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If five or less names are available, a list will display.
If more than five are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the street name with the correct prefix from
the list (Dr., Ln., St., etc.).
5. Once a street has been selected the City name
category will automatically be selected for entry.
If five or less cities are available for the selected
street, the system will display the list of cities.
If more than five cities are available the system will
display the alpha keyboard. Start entering the
city name. If five or less names are available,
a list will display. If more than five are available,
there will be a screen button with a number in it,
it represents the number of available cities.
Select this button to view the list and select a city.
2-18
6. Once a city has been selected, the numeric
keyboard will display, allowing you to enter
the house number. The system will display the
house number range that is available for the street.
7. Select the Go screen button. The map screen, with
the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See "Getting Started on Your Route" later in this
section for more information.
Advertisement
