Advertisement
Preset Destination
The preset destination entry method allows you to set a
destination by selecting from one of five previously
stored destinations. Besides voice tagged destinations,
these are the only destinations available to set while
the vehicle is moving. If a destination is not set for one
of the screen buttons, the button will be dimmed
and not available for use. See "Adding or Changing
Preset Destinations" later in this section for information
on how to add a preset destination.
2-26
To use the preset destination entry method, do the
following:
1. Press the DEST hard key.
2. Select the desired preset destination screen button.
The screen buttons are labeled with the name that
was selected for the destination when it was
stored. The map screen, with the destination
marked, will display.
3. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
4. Select the Start Guidance screen button. You are
now ready to start your route.
See "Getting Started on Your Route" later in this
section for more information.
Advertisement
