Bosch 06019K3000 Original Instructions Manual page 16

16 | English
Cordless Drill/Driver
Max. drilling diameter (1st/2nd gear)
– Wood
– Steel
– Masonry
Chuck capacity
Max. screw diameter
Weight according to EPTA-Proced-
B)
ure 01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
tion and during storage
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V 2.0Ah.
B) Measured with GBA 18V 1.5Ah and GBA 18V 12Ah.
Noise/Vibration Information
Noise emission values determined according to EN 62841-2-1.
The noise level when working can exceed the volume stated.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1:
h
Drilling
a
h
K
Impact drilling
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
1 609 92A 892 | (13.09.2022)
GSR 185-LI
mm
mm
mm
mm 1.5–13
mm
kg 1.3–2.3
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSR 185-LI
dB(A)
dB(A)
dB
2
m/s < 2.5
2
m/s
2
m/s
2
m/s
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
GSB 185-LI
35 35
10 10
− 10
1.5–13
10 10
1.3–2.4
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSB 185-LI
72 86
83 97
5
< 2.5
1.5 1.5
– 12.2
– 1.5
Bosch Power Tools
5