General Electrical Safety Instructions - Sundance Spas 880 Series Owner's Manual

880 Export Series
System and Wi-Fi Router Requirements
a. The hardware for the Sunsmart™ communicates over a 2.4 GHz
home network supporting 802.11b/g wireless technology. The
hardware does not support 5 GHz networks. If you have 2 Wi-Fi
networks, one at 2.4 GHz and the other at 5 GHz, then make
sure that your smart phone is connected to the 2.4 GHz network
throughout the setup process. It is recommended that you turn off
your 5 GHz network during the setup process.
NOTE: The system does not support 802.11/ac/n. If your Wi-Fi router is
either 802.11ac or n, it may work with the module if it supports 802.11b/g.
b. Standard wireless setup supports only home network routers
configured to use open (no security) or WEP/WPA/WPA2.
c. Wi-Fi signal strength of -60 dBM or better is highly suggested to
ensure non-interrupted cloud service.
d. The wireless access is not supported on the following systems:
• Guest networks/Hotspots that use a portal page to login.
• Enterprise access points configured to require certificates or some
other form of enterprise authentication (aka "802.1X", "RADIUS", or
"WPA/WPA2 Enterprise").
e. List of compatible routers and access points is published on
Sundance Spas' http://www.sundancespas.com/features/sunsmart/
f. The Wi-Fi module does not prefer any channels (1-11) on the 2.4
GHz band. A Wi-Fi spectrum analyzer can be used to check how
many Wi-Fi networks are operating on different channels on the
2.4 GHz band. If there are too many networks on channel 6 (for
instance), then it is recommended that the customer change the
operating channel of their Wi-Fi network. Most routers auto-change
the channel but there are some routers that may have to be changed
manually.
g. If there are too many devices operating on a customer's home Wi-Fi
network that may affect the connectivity of the Wi-Fi module (check
the maximum number of devices that can be connected to the
Access Point that the customer is using).
5.0

General Electrical Safety Instructions

Your new Sundance
the-art" equipment system. It contains the most advanced
safety and self-protective equipment in the industry.
Nonetheless, this hot tub must be installed properly to ensure
dependable usage. Please contact your local Sundance Spas dealer or
local building department should you have any questions regarding your
installation.
Proper grounding is extremely important. Sundance hot tubs are
equipped with a current collector system. A pressure wire connector is
provided on the surface of the control box, located inside the equipment
12
®
hot tub is equipped with the "state-of-