General Electrical Safety Instructions - Sundance Spas maxxus 880 Series Owner's Manual

If you have any questions regarding the placement or installation of your
hot tub, consult your Sundance Dealer.

4.0 general Electrical Safety Instructions

Your new Sundance hot tub is equipped with the "state-of-the-art"
TM
Sentry equipment system. It contains the most advanced safety
and self-protective equipment in the industry. Nonetheless, this hot tub
must be installed properly to insure dependable usage. Please contact
your dealer or local building department should you have any questions
regarding your installation.
Proper grounding is extremely important. Sundance hot tubs are
equipped with a current collector system. A pressure wire connector is
provided on the surface of the control box, located inside the equipment
door (Figure-C, Page 11) to permit connection of a bonding wire between
this point and any ground metal equipment, metal water pipe or conduit
within 5 feet (1.5m) of the hot tub, or copper clad grounding rod buried
within 5 feet (1.5m) of the hot tub. Bonding wire must be at least No. 8
2
AWG (8.4 mm ) solid copper wire. This is a most important safety assur-
ance feature.
Before installing this hot tub, check with the local building department to
insure installation conforms to local building codes.
Page 9