Advertisement
2
Charging the Battery
1
A
2
A.
Remove the battery cover to access the USB-C connection.
B.
Charge the battery using a power adapter included with your mobile
device.
C.
Remove the plastic film from the camera's lens.
B
3
Pair Button
C
IR LED
1.
Charge the battery with the included
USB cable. Follow the illustration on
the left for connection (power adapter
not included). Charge the battery for
about 30 mins, then disconnect.
2.
Insert the battery into the camera
(it will click into place). After a short
moment, you will hear a beep sound.
3.
Leave the antenna in a vertical
position for the best reception.
Remove the plastic film from the
camera's lens.
4.
Follow the instructions in step 3 to
pair the camera to your NVR.
Advertisement
