Table of Contents
Advertisement
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
• Check the batteries in the remote. May need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20 feet.
performed with remote.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions
5.1 channel sound is not
are met. :
being reproduced.
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
The
icon appears on
1. The DVD's software restricts it.
screen.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is
out of range.
• Check if the disc has a Menu.
Disc Menu doesn't appear.
• Some of the functions selected in the Setup Menu may not work
Play mode differs from the
properly if the disc is not encoded with the corresponding function.
Setup Menu selection.
The screen ratio cannot be
• The Screen Ratio is fixed on your DVDs.
changed.
• Make sure you have selected the correct Digital Output in the Audio
No audio.
Options Menu.
• Press power on from a cold start with no disc in the unit. Press the STOP
Forgot password
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
If you experience other
• Go to the contents and find the section of the instruction book that
problems.
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
42
Downloaded From Disc-Player.com Samsung Manuals
Action
Page
P6
P9
P14
P17
P35~40
P40
P39
P38
Power Requirements
AC 120 V, 60 Hz
Power Consumption
15 W
Weight
15.4 lbs
General
Dimensions
W 16.9 in x D 15.9 in x H 3.5 in
+41°F to +95°F
Operating Temperature Range
10 % to 75 %
Operating Humidity Range
Reading Speed : 11.45 ft/sec
DVD
Approx. Play Time
(DIGITAL VERSATILE DISC)
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
CD : 5"
Disc
(COMPACT DISC)
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
CD : 3
"
1/2
Maximum Play Time : 20 min.
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
VCD : 5"
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Y : 1.0 Vp-p (75 Ω load)
Component Video
Pr : 0.70 Vp-p (75 Ω load)
Video
Pb : 0.70 Vp-p (75 Ω load)
Output
S-VIDEO
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
2 Channel
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
Audio
*S/N Ratio
110 dB
Output
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
• Samsung Electronics Co., Ltd. reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Specifications
.
43
Advertisement
Table of Contents
