Inserting The Bobbin - JUKI HZL-355ZW-A Instruction Manual

B
A
B

Inserting the bobbin

When inserting or removing
the bobbin, the needle must
be fully raised.
1. Inserting the bobbin in the
2. Pull the thread through the
3. Draw the thread clockwise
A
4. Pull out about 15 cm of
Turn power switch to "O" before
inserting or removing the
bobbin.
C
32
bobbin holder with the thread
running counter clockwise
direction (arrow).
slit (A).
until it slips into the notch (B).
thread and attached the
bobbin cover plate (C).
Attention: