Building-In - Zanussi ZOU 362 User Manual

Building-in

To ensure correct operation of the built-in assembly, the
kitchen cabinet and the recess for the built-in appliance must
have suitable dimensions. When the appliance is fitted-in,
there must be no open spaces left and it must be closed on
all sides by the kitchen furniture to prevent the possibility of
inadvertently touching "live" (current carrying) parts of the
oven. All parts ensuring such a protection, including any
covering panel (for instance, if the appliance is installed at
the end or at the beginning of a kitchen counter) must be
fastened in such a way as to prevent removal of the same
without the aid of some tool. This appliance can be placed
with its back and with one side close to appliances or walls
of higher height. The other side, instead, must be placed
close to furniture or appliances, having the same height.
Overall oven dimensions (Fig. 10)
Building-in under a kitchen counter
The recess must have the dimensions shown in Fig. 11.
Before carrying out the building-in of the oven, connect it to
the hob (see corresponding chapter); then recess
completely the oven under the counter; open the oven
door and secure the oven to the kitchen cabinet .
Securing the oven to the cabinet (Fig. 12).
1. Fit the appliance into the cabinet recess.
2. Open the oven door and secure the oven to the kitchen
cabinet by placing the four distance holders (A) in the
holes provided in the oven frame and then inserting
the four wood screws (B).
34
Fig. 10
Fig. 11
Fig. 12