Zanussi ZOU 362 User Manual page 25

Top oven element only
This function is suitable for finishing cooked dishes, e.g.
lasagne, shepherds pie, cauliflower cheese etc.
Bottom oven element only
This function is particularly useful when blind-baking pastry.
It may also be used to finish off quiches or flans to ensure the
base pastry is cooked through.
The thermostat control light will remain on until the
correct temperature is reached. It will then cycle on
and off to show the temperature is being
maintained.
Conventional Cooking
- The middle shelf position allows for the best heat
distribution. To increase base browning simply lower the
shelf position. To increase top browning, raise the shelf
position.
- The material and finish of the baking trays and dishes
used will affect base browning. Enamelware, dark,
heavy or non-stick utensils increase base browning,
while oven glassware, shiny aluminium or polished
steel trays reflect the heat away and give less base
browning.
- Always place dishes centrally on the shelf to ensure
even browning.
- Stand dishes on suitably sized baking trays to prevent
spillage onto the base of the oven and make cleaning
easier.
- Do not place dishes, tins or baking trays directly on the
oven base as it becomes very hot and damage will
occur.When using this setting, heat comes from both the
top and bottom elements. This allows you to cook on a
single level and is particularly suitable for dishes which
require extra base browning such as quiches and flans.
Gratins, lasagnes and hotpots which require extra top
browning also cook well in the conventional oven.
How to use the conventional oven
1. Turn the oven function control knob to the required
cooking function
2. Turn the thermostat control knob to the required
temperature.
Defrosting
The oven fan operates without heat and circulates the air, at
room temperature, inside the oven.
Ensure the thermostat control knob is in the
OFF position.
.
25