Before Using The Oven For The First Time - Zanussi ZOU 362 User Manual

Double circuit cooking zone
(Check the combination hob list in the "Technical
Data" chapter)
If you wish to have the two electric circuits work
simultaneously, turn the knob to maximum position
and then turn it towards symbol
a click. Now the 2 circuits work together.
Then, you can regulate the power of the cooking zone
by turning the control knob anticlockwise.
Carefully supervise cookings with oil or fats,
since these types of food can result in a fire,
when over-heated.
The Safety Thermostat
To prevent dangerous overheating (through incorrect use
of the appliance or defective components), the oven is
fitted with a safety thermostat, which interrupts the
power supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to incorrect use
of the appliance, it is enough to remedy the error after the
oven has cooled down; if on the other hand, the
thermostat triggers because of a defective component,
please contact Customer Service.
The Cooling Fan
The oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool.The
fan switches on automatically when the oven is activated.
Warm air is blown out through the aperture near the oven
door handle. The fan switches off when, after cooking, the
oven function control knob is set to OFF position

Before using the oven for the first time

Remove all packaging, both inside and outside
the oven, before using the oven.
Before using for the first time, the oven should be
heated up without food.
During this time, an unpleasant odour may be emitted.
This is absolutely normal. It is caused by manufacturing
residues.
Ensure the room is well ventilated.
1. Switch the oven function control knob to fan
cooking
2. Set the thermostat control knob to 250.
3. Open a window for ventilation.
4. Allow the oven to run empty for approximately
45 minutes.
22
" ". You will hear
0
.
9
.