TYAN Transport GX18 Service Engineer's Manual page 5

About this Manual
This manual provides you with instructions on installing your
Transport GX18/Trophy NR18. This manual is intended for experi-
enced users and integrators with hardware knowledge of personal
computers.
This manual consists of the following parts
Chapter 1:
Chapter 2:
Chapter 3:
For information on the mainboard, please refer to the attached main-
board user's manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
Provides an Introduction to the
Transport GX18/Trophy NR18 B5365 barebone,
packing list, describes the external components,
gives a table of key components, and provides
block diagrams of the system.
Covers procedures on installing the CPU, mem-
ory module, PCI-E card, slim CD-ROM and hard
drive.
Covers removal and replacement procedures for
pre-installed components
iii