Entering The Operator's Position; Operating The Parking Brake; Engaging The Blade-Control Switch (Pto) - Toro TimeCutter HD MyRide Operator's Manual

Entering the Operator's
Position
Use the mower deck as a step to get into the
operator's position (Figure
Figure 13
Operating the Parking
Brake
Always engage the parking brake when you stop the
machine or leave it unattended.
Engaging the Parking Brake
Park the machine on a level surface.
Figure 14
13).
Disengaging the Parking Brake
To disengage the parking brake, pull the lever out of
the detent slot and toward you, then push it down
(Figure 15).
1. Push the parking brake
out of the detent slot and
toward you.
g029797
Engaging the Blade-Control
Switch (PTO)
Note:
Always engage the blades with the throttle in
the F position
AST
g188778
20
Figure 15
2. Push the parking brake
down.
Figure 16
(Figure 17).
Figure 17
g188777
g008945
g187516