Chevrolet Blazer 2022 Owner's Manual page 42

Chevrolet Blazer Owner Manual (GMNA-Localizing-MidEast-16401983) -
2023 - CRC - 6/17/22
42 Seats and Restraints
Caution
Folding a rear seat with the seat belts
still fastened may cause damage to the
seat or the seat belts. Always unbuckle
the seat belts and return them to their
normal stowed position before folding a
rear seat.
To fold the seatback:
1. Fold the head restraint, if equipped. See
Head Restraints 0 32.
2. Pull the handle on the side of the seat
cushion to unlock it.
3. Fold the seatback forward.
Repeat the steps to fold the other
seatback, if desired.
Driver Side Shown, Passenger Side Similar
The rear seatbacks can also be folded
forward by pulling the levers on either side
of the rear cargo area.
Raising the Seatback
Warning
If either seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on
the seatbacks to be sure they are locked.
Warning
A seat belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that
the seat belts are properly routed and
attached, and are not twisted.
To raise a seatback:
1. Lift the seatback up and push it rearward
to lock it in place.
2. Return the head restraint to the upright
position. See Head Restraints 0 32.
3. Push and pull the top of the seatback to
be sure it is locked into position.
4. Repeat the steps to raise the other
seatback, if necessary.
If additional cargo space is not needed, the
seatbacks should be kept in the upright,
locked position.