Installing Cpu & Heatsink - MSI S2205 2U24 User Manual

Installing CPU & Heatsink
1. Place the processor carrier on top of the processor in the tray with their pin 1
indicators aligned. If installed properly, the CPU will snap into the carrier's side
latches and the carrier will latch firmly to it.
2. Remove the protective film at the bottom of the heatsink if any.
3. Make sure the heatsink has pre-applied thermal paste. If there isn't, you'll need to
apply thermal paste to the bottom center of the heatsink.
4. Check the heatsink for a diagonally cut corner or the #1clip on the heatsink label
if present. Align the processor Carrier's Pin 1 indicator with the heatsink's cut
corner (#1 clip), then gently press the heatsink down to engage the carrier's
latching mechanism to the heatsink at four corners.
30
CPU & Heatsink
Processor Carrier
(CPU Carrier)
Pin 1 indicators
⚠
Note
Please refer to the following table for the
corresponding CPU carrier.
CPU Package Type
Sapphire Rapids- SP XCC
Emerald Rapids- SP XCC
Sapphire Rapids- SP MCC
Emerald Rapids- SP MCC
Sapphire Rapids EE
Sapphire Rapids + HBM
Thermal paste
application area
CPU Carrier Code
E1A
E1B
E1C