Table of Contents
Advertisement
Next steps
1. Install the
plastic display assembly
2. Install the
wireless
card.
3. Install the
M.2 2230 solid state drive
4. Install the
memory
modules.
5. Install the
base
cover.
6. Install the
SD
card.
7. Follow the procedure in
Display bezel
Removing the display bezel
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
memory
modules.
5. Remove the
M.2 2230 solid state drive
6. Remove the
wireless
card.
7. Remove the
plastic display
8. Remove the
hinge
caps.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
or
aluminum display assembly
or
M.2 2280 solid state drive
After working inside your
Before working inside your
or
M.2 2280 solid state drive
assembly.
(whichever applicable).
(whichever applicable).
computer.
computer.
(whichever applicable).
Removing and installing Field Replaceable Units (FRUs)
97
Advertisement
Table of Contents
