Table of Contents
Advertisement
6. Install the
SD
card.
7. Follow the procedure in
Camera assembly
Removing the camera module (with plastic chassis)
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
plastic display
6. Remove the
hinge
caps.
7. Remove the
display
bezel.
8. Remove the hinges.
9. Remove the
display
panel.
10. Remove the
eDP
cable.
About this task
The following images indicate the location of the camera module (in a system shipped with plastic chassis) and provide a visual
representation of the removal procedure.
After working inside your
Before working inside your
assembly.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
119
Advertisement
Table of Contents
