Steps
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
Next steps
1. Install the
hinge
caps.
2. Install the
plastic display assembly
3. Install the
wireless
card.
4. Install the
M.2 2230 solid state drive
5. Install the
memory
modules.
6. Install the
base
cover.
7. Install the
SD
card.
8. Follow the procedure in
or
aluminum display assembly
or
M.2 2280 solid state drive
After working inside your
(whichever applicable).
(whichever applicable).
computer.
Removing and installing Field Replaceable Units (FRUs)
101