Table of Contents
Advertisement
6. Remove the
M.2 2230 solid state drive
7. Remove the
wireless
card.
8. Remove the fan.
9. Remove the
UMA heat sink
NOTE:
The system board can be removed along with the heat sink.
10. Remove the
plastic display assembly
About this task
The following image indicates the connectors on your system board:
1. Fan connector
3. eDP connector
5. Memory modules
7. Keyboard-backlight FFC connector
9. Touchpad FFC connector
11. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
or
M.2 2280 solid state drive
or
discrete heat sink
(whichever applicable).
or
aluminum display assembly
(whichever applicable).
(whichever applicable).
2. I/O board FFC connector
4. DC-in port connector
6. Keyboard FFC connector
8. Battery connector
10. Wireless connector
12. Solid-state drive connector
Removing and installing Field Replaceable Units (FRUs)
131
Advertisement
Table of Contents
