Siemens SIMATIC S7-1500 Manual page 74

Article number
Local data
per priority class, max.
•
Address area
Number of IO modules
I/O address area
Inputs
•
Outputs
•
per integrated IO subsystem
– Inputs (volume)
– Outputs (volume)
Subprocess images
Number of subprocess images, max.
•
Hardware configuration
Number of distributed IO systems
Number of DP masters
integrated
•
Via CM
•
Number of IO Controllers
integrated
•
Via CM
•
PtP CM
Number of PtP CMs
•
Time of day
Clock
Type
•
Backup time
•
Deviation per day, max.
•
Operating hours counter
Number
•
Clock synchronization
supported
•
to DP, master
•
in AS, master
•
in AS, slave
•
on Ethernet via NTP
•
SIMATIC Drive Controller
Equipment Manual, 11/2019, A5E46600370-AA
6ES7615-4DF10-0AB0
64 kbyte; max. 16 KB per block
16 384; max. number of modules / submodules
32 kbyte; All inputs are in the process image
32 kbyte; All outputs are in the process image
32 kbyte
32 kbyte
32
64
1
Expansion via CMs / CPs (PROFIBUS, PROFINET, Ethernet) not
possible; these CMs / CPs can only be operated in a central rack
2
Expansion via CMs / CPs (PROFIBUS, PROFINET, Ethernet) not
possible; these CMs / CPs can only be operated in a central rack
The number of connectable PtP CMs (distributed) is only limited by
the number of available slots
Hardware clock
6 wk; At 40 °C ambient temperature, typically
10 s; Typ.: 2.4 s
16
Yes
Yes
Yes
Yes
Yes
Technical specifications
6ES7615-7DF10-0AB0
73