SATO CL608 Service Manual page 171

9-9 Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors
CL608 & CL612
Serial #8199999 and below
RAMP PLATE
Fig. 9-25
RAMP FRAME
REMOVE (3) SCREWS
TO DETACH THE RAMP
PLATE FROM THE
FOR UNITS WITH DISPENSER
OPTION INSTALLED, THIS IDLER
AND GEAR MUST BE REMOVED
FOR ACCESS TO THE 3RD
SCREW (SCREW IS UNDER
GEAR) WHICH SECURES THE
RAMP TO THE FRAME
PN 9001024
Rev. B Jan. 2000
SECTION 9 – Addendum
REMOVE (3) SCREWS TO
DETACH THE RAMP PLATE
FROM THE RAMP FRAME
BACK PLATE
SATO CL608 & CL612 SERVICE MANUAL
Serial No. 81199999 and below
RAISE THE
ACCESS DOOR
Fig. 9-24
Fig. 9-26
Fig. 9-27
Page 9-19