SATO CL608 Service Manual page 127

SECTION 6 – Replacement Procedures
6-11 Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors
STEP PROCEDURE
OFF
Fig. 6-60
Fig. 6-61
Fig. 6-62
Fig. 6-63
NOTE: FOR UNITS WITH DISPENSER OPTION INSTALLED,
IDLER AND GEAR MUST BE REMOVED FOR ACCESS TO THE
3RD SCREW WHICH IS UNDER THE GEAR. REFER TO
FIG. 6-64, 6-65 & 6-66
Fig. 6-67
Fig. 6-68
Fig. 6-69
Fig. 6-70
Fig. 6-71
NOTE:
Page 6-30 SATO CL608 & CL612 SERVICE MANUAL
PN 9001024
Rev. B Jan. 2000