SATO CL608 Service Manual page 130

SECTION 6 – Replacement Procedures
6-11 Replacing the Paper End Switch (Micro-Switch) and the
Bottom Half of the Notch/Gap and Eye-Mark Sensors
BOTTOM HALF NOTCH/GAP
AND EYE-MARK SENSORS
PAPER END-SWITCH
(MICRO-SWITCH)
Fig. 6-69
NOTCH/GAP
SENSOR
(BOTTOM
Fig. 6-70
HALF)
PAPER END SWITCH
REMOVE (2)
REMOVE (2)
SCREWS
SCREWS
Fig. 6-71
PN 9001024 Page 6-33
SATO CL608 & CL612 SERVICE MANUAL
Rev. B Jan. 2000