Power State At Cold Start Set - Planar Leyard Simplicity Series User Manual

4k displays

Table of Contents

10.3 Power State at Cold Start Set

Bytes

Bytes Description

0xA3 = Power State at Cold

DATA[0]

Start- Set

DATA[1]

Power State at Cold Start

The value is stored and applied only when the display starts up from cold start power state the

next time:



Power Off: The monitor will automatically switch to Power Off mode (even if the last

status was on) whenever the main power turns on, or resumes after a power interruption.



Forced On: The monitor will automatically switch to Power On mode whenever the main

power turns on or resumes after a power interruption.



Last Status: The monitor will be automatically switch to the last status (either Power Off

or On) whenever the main power turns on or resumes after a power interruption.

Example: Report status of Forced On for Power State at Cold Start (Display Address 01)

Header

Monitor ID

0x21

0x01

Simplicity Series 4K Displays User Guide

020-1344-00B