Troubleshooting - Varytec Retro Blinder 80 LED User Manual

Troubleshooting

10 Troubleshooting
Retro Blinder 80 LED
32
Blinder
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom
The unit does not work, no light
No response to the DMX con‐
troller
Remedy
1. Check the mains connection and the main fuse.
2. Check the settings in 'manual' mode.
1. Check whether the DMX cables run near or parallel to
high-voltage cables that may cause damage or interfer‐
ence to a DMX interface circuit.
2. Try using another DMX controller.