Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Varytec Easymove XL 60 Spot
Summary of Contents for Varytec Easymove XL 60 Spot
- Page 1 User’s manual Easymove XL 60 Spot...
-
Page 2: Table Of Contents
Table of content Safety instructions........................... 3 Introduction ............................. 4 2.1. DMX channels ........................4 Setup............................... 4 3.1. Replace fuse .......................... 4 3.2. Connect the fixtures ....................... 4 3.3. 3 to 5 Pin xlr converter ......................5 3.4. Setup the DMX connection ....................5 Operating Instructions........................ -
Page 3: Safety Instructions
1. Safety instructions FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperatureAvoid exposing it to direct rays of the sun or near a heating appliance. Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust. -
Page 4: Introduction
2. Introduction 11 DMX Channels Pan 630°, Tilt 270° Colorwheel: 7 colours + open, rainbow effect Gobowheel: 6 gobos+open, wheelrotation Variable electronic strobo Variable electronic dimmer (0-100%) LED Display menu with invert Possibility to set manufacturers settings Fan cooled 2.1. DMX channels 3. -
Page 5: To 5 Pin Xlr Converter
can support. Maximum recommended serial data link distance:500 meters(1640ft). Maximim recommended number of fixtures on a serial dqta link:32 fixtures. 3.3. 3 to 5 Pin xlr converter Note! If you use a controller with a 5 pin DMX output connetor. you will need to use a 5pin to 3 pins adapter The chart below details a proper cable conversion: 3.4. -
Page 6: Menu Map
<ENTER> button to select the menu function currently displayed, or to enable a menu option. To return to the previous option or menu without changing the value, press the <MENU> button. No alterative worth that return re-option or menu , press(MENU)button 4.2. -
Page 7: Technical Data
To set the tilt to inversion Press the MENU until it shows RTOF Use the UP/DOWN buttons until it shows RTON, press ENTER to confirm. Display inversion Press the MENU until it shows RDOF. Use the UP/DOWN buttons until it shows RTON, press ENTER to confirm. Default setting Press the MENU until it shows DFON. -
Page 8: Dmx Channel List
5.1. DMX channel list 8 / 9... - Page 9 Importeur: B & K Braun GmbH Industriestraße 1 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com 9 / 9...