Figure 3: Cpe100/Cpe115 Membrane Pushbutton And Module Status Leds - Emerson PACSystems RX3i User Manual

PACSystems™ RX3i and RSTi-EP CPU Reference Manual
GFK-2222AK
• The CPE100/CPE115 is secure by design, incorporating technologies such as secure boot, trusted platform
module (disabled), and encrypted firmware updates.
•
Module LEDs on the face plate provides basic status and control information of CPE100/CPE115.
•
When shipped, the CPE100/CPE115 is configured only for DIN-rail mounting. An alternate panel-mount
adaptor plate (ICMFAACC001-AA) is optional, but not included in the ship-set.
2.3.1.2 Membrane Run/Stop Pushbutton

Figure 3: CPE100/CPE115 Membrane Pushbutton and Module Status LEDs

If the blue membrane pushbutton (Figure 3) is pressed while the CPE100/CPE115 is
powering up, it restores the default IP address (192.168.0.100). It also erases the stored
hardware configuration, logic, and contents of the backup RAM.
During normal operation, briefly pressing the membrane pushbutton changes the state
of the CPU from its current Run/Stop state to its alternate state, as shown in the following
state diagram:
CPU Features & Specifications
Section 2
October 2019
38