Figure 4: State Diagram For Cpe100/Cpe115 Run/Stop Operation - Emerson PACSystems RX3i User Manual
Hide thumbs
Also See for PACSystems RX3i:
- User manual (164 pages) ,
- Application manual (37 pages) ,
- Manual (37 pages)
Table of Contents
Advertisement
PACSystems™ RX3i and RSTi-EP CPU Reference Manual
GFK-2222AK
Figure 4: State Diagram for CPE100/CPE115 Run/Stop Operation
The Run/Stop switch is enabled by default; it can be disabled in PME Hardware
Configuration (HWC) settings.
2.3.1.3
LED Indicators (LEDs)
2.3.1.3.1
Ethernet Status Indicators
There are two LEDs (Yellow/Green) for each Ethernet ports of LAN1 and LAN2, which are
embedded in the RJ45 connectors. The green LED indicates an Ethernet connection has
been established. The yellow LED indicates packet traffic.
CPU Features & Specifications
STOP/IO
RUN/IO
Disabled
Enabled
Section 2
October 2019
39
Advertisement
Table of Contents
