Sony DVP-NS3100ES Service Manual page 68

DVP-NS3100ES
Pin No. Pin Name
124 RESET
125 IRQ (2)
126 IRQ (1)
127 IRQ (0)
128 CPU-BE (0)
129 CPU-BE (1)
130 CPU-RW
131 CPU-WAIT
132 CPU-CE (3)
133 CPU-CE (2)
134 CPU-CE (1)
135 CPU-CE (0)
136 VDD3-3
137 VSS
138 CPU-RAS1
139, 140 CPU-CAS0,CPU-CAS1
CPU-DATA (0) to
141 to 144
CPU-DATA (3)
CPU-DATA (4) to
145 to 148
CPU-DATA (7)
149 VDD1-8
150 VSS
CPU-DATA (8) to
151 to 158
CPU-DATA (15)
159 VDD3-3
160 VSS
CPU-ADR (1) to
161 to 164
CPU-ADR (4)
CPU-ADR (5) to
165 to 167
CPU-ADR (7)
168 to 170 CPU-ADR (8) to
CPU-ADR (10)
171 VDD1-8
172 VSS
CPU-ADR (11) to
173 to 183
CPU-ADR (21)
184 VDD3-3
185 VSS
186 FE_RST
187 RSERROR
188 A_MUTE
189 LETTER
190 H_SCL_BP
191 SQUEEZE
192 H_SDA_BP
193 I2S_SYNC_OUT
194 BE_SDA
68
I/O
I Reset signal input from the system controller "L": reset
I Interrupt request signal input from the SACD media player
I Interrupt request signal input from the HDMI transmitter
I Interrupt request signal input from the DVD interface
O Write enable signal output to the flash memories
O Write enable signal output terminal Not used
Read/write selection signal output to the SACD media player "L": read,
O
"H": write
I Chip wait signal input from the SACD media player
O Chip enable signal output to the flash memory
O Chip select signal output to the SACD media player
O Chip enable signal output to the flash memory
O Chip select signal output terminal Not used
- Power supply terminal (+3.3V)
- Ground terminal
O Row address signal output terminal Not used
O Column address signal output terminal Not used
I/O Two-way data bus with the flash memories and SACD media player
I/O Two-way data bus with the flash memories and SACD media player
- Power supply terminal (+1.8V)
- Ground terminal
I/O Two-way data bus with the flash memories and SACD media player
- Power supply terminal (+3.3V)
- Ground terminal
O Address signal output to the flash memories and SACD media player
O Address signal output to the flash memories and SACD media player
O Address signal output to the flash memories
- Power supply terminal (+1.8V)
- Ground terminal
O Address signal output to the flash memories
- Power supply terminal (+3.3V)
- Ground terminal
O Reset signal output to the DVD interface "L": reset
I Error signal input from the DVD interface
O Audio muting on/off control signal output terminal "L": muting on
O Letter box control signal output terminal Not used
O I2C bus clock signal output terminal Not used
O Squeeze control signal output terminal
I/O I2C two-way data bus terminal Not used
O Sector sync signal or absolute time sync signal output to the SACD media player
I2C two-way data bus with the DVD interface, interlace/progressive converter and
I/O
video encoder
Description