Sony DVP-NS3100ES Service Manual page 17

2-7. Changer Manual Move
On this test mode screen, selecting [7] enables the machine operation
such as disc loading. The following screen appears.
Display when [7] is selected in the Drive Manual Operation
## Changer Manual Move ##
ENTER : Mecha Initial
PLAY : Loading In
STOP : Loading Out
OP/CL : Door Open/Close
UP : Poper Up
DOWN : Poper Down
jogFOR : Table R StepTurn
jogPRV : Table L StepTurn
DISP : Sensor Status
RETURN : Exit
[ENTER]
: Performs initialization of mechanism deck.
Mecha Initial Because the mechanical initialization is
performed when the machine enters the Drive
Manual Operation mode, use this item when
an error such as adjustment error occurs.
[PLAY]
: Not used in this set.
Loading In
[STOP]
: Not used in this set.
Loading Out
[OP/CL]
: Opens and closes the door.
Door Open/Close
( key)
Z
[UP]
: Not used in this set.
Poper Up
[DOWN]
: Not used in this set.
Poper Down
[jog FOR] : Not used in this set.
Table R step Turn
[jog PRV]
: Not used in this set.
Table L step Turn
[DISP]
: Not used in this set.
Sensor Status
2-8. Changer Mecha Check
Not used in this set.
3. Mecha Aging
The mechanism aging is not supported.
4. Emergency History
### EMG. History ###
Laser Hours
CD
DVD
01.00 00 00 00
00 00 00 00
02.00 00 00 00
00 00 00 00
Select : 1-9 Scroll : UP/DOWN
(1: Last EMG.)
On the Test Mode Menu screen, selecting [4] displays the
information such as servo emergency history. The history
information from last "1" up to "10" can be scrolled with [Q] key or
[q] key. Also, specific information can be displayed by directly
entering that number with the ten-key pad from [1] to [9].
The upper two lines display the laser ON total hours. Data below
minutes are omitted.
Clearing History Information
Clearing laser hours
Press [TOP MENU] and [CLEAR] keys in this order.
Both CD and DVD data are cleared.
Clearing emergency history
Press [DISPLAY] and [CLEAR] keys in this order.
Initializing setup data
Press [MENU] and [CLEAR] keys in this order.
The data have been initialized when "Set Up Initialized"
message is displayed.
The EMG. History display screen will be restored soon.
5. Version Information
### Version Information ###
IF con Ver:x.xxx(xxxx)
B/E Ver:xxx xxx
F/E Ver:xx
Model
Region
Exit : RETURN
IF con : IC404 on the MAIN board
B/E : IC256 on the MAIN board
F/E : IC105 on the MAIN board
6. Video Level Adjustment
On the Test Mode Menu screen, selecting [6] displays color bars for
video level adjustment. During display of color bars, OSD disappears
but the menu screen will be restored if pressing the [RETURN] key.
DVP-NS3100ES
xxh xxm
xxh xxm
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
Exit : RETURN
:DVP-NS3100ES(X)
:xxx(x)
17