Advertisement
12. Technical Specifications
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
U
= voltage
(max. voltage = 12 V,
nominal voltage = 10.8 V)
s
= Oscillating frequency at idle speed
0
o
= Oscillation angle left / right
m
= Weight with smallest battery pack
Measured values determined in conformity with EN
62841.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a
= Vibration emission value (surface
h, DS
grinding)
a
= Vibration emission value (scraping)
h, S
a
= Vibration emission value (sawing with
h, ST
plunge cutting saw blade)
a
= Vibration emission value (sawing with
h, SS
segment saw blade)
K
= Uncertainty (vibration)
h,...
Typical A-effective perceived sound levels:
L
= sound pressure level
pA
L
= acoustic power level
WA
K
, K
= Uncertainty
pA
WA
The noise level can exceed 80 dB(A) during
operation.
Wear ear protectors!
ENGLISH en
11
Advertisement
