Connecting Spool Gun - Miller EnPak A30 GBW Owner's Manual

11-8. Connecting Spool Gun

.
Spoolmate 200 shown.
4
Tools Needed:
3/4, 5/8 in.
OM-283757 Page 56
.
A complete Parts List is available at www.MillerWelds.com
Work
3
2
1
1 Spool Gun Plug
Insert plug into receptacle, and
tighten threaded collar.
2 Weld Cable
3 Positive Weld Output Terminal
Connect weld cable to weld output
terminal.
4 Shielding Gas Hose
5 Regulator/Flowmeter (Not
Shown)
Route shielding gas hose up to
regulator/flowmeter. Connect gas
hose to fitting on regulator/flowmeter.
Optional Parts:
Tweco adapter 191981 is needed to
connect Spoolmate 200 and 30 A
spool guns to positive weld output ter-
minal.
Extension kit 132228 extends spool
gun 10-pin cable, weld cable, and gas
hose by 25 feet (7.6 m). Extension kit
allows weld cable connection to be
made at low voltage DC terminal strip
(see Section 5-5).
Gas regulator 234263 allows gas
hose connection to gas cylinder.
805 243-A / 243 737-B / 907772