Table of Contents
Advertisement
OPERATION
HOOK AND LOOP POWER CORD WRAP (Fig. 7)
This tool is fitted with a hook and loop power cord
wrap, this is designed to keep the power cord
wrapped up when the tool is not in use and for easier
storage of the tool, loop the power cord several times
(depending on the length) and loop the wrap around
the power cord until secure.
TM
Livetool Indicator
This tool features a Livetool Indicator
illuminates as soon as the tool is connected to the
power supply. This warns the user that the tool is
connected to live power and will operate when the
switch is pressed.
MAINTENANCE
After use, check the tool to make sure that it is in
good condition. It is recommended that you take
this tool to a RYOBI Authorized Service Centre for
a thorough cleaning and Iubrication at least once
a year.
Don't make any adjustments while the motor is in
motion.
Always disconnect the power cord from the power
supply before changing removable or consumable
parts (blade), before lubricating or working on the
unit.
If the supply cord is damaged, it shall be
replaced by the manufacturer or its service
centre or similar qualified person in order to
avoid a hazard.
ENVIRONMENTAL PROTECTION
(7) which
TM
5
WARNING
To ensure safety and reliability, all repairs should
be performed by an AUTHORIZED SERVICE
CENTRE or other QUALIFIED SERVICE
ORGANIZATION.
Do not dispose of in general household
waste.
Instead,
environmentally friendly way. Contact your
local recycling centre or council for advise.
Ryobi takes the care of the environment very
seriously.
dispose
in
an
Advertisement
Table of Contents
