Ryobi ESS2414K Owner's Operating Manual
1/4 sheet sander
Hide thumbs
Also See for ESS2414K:
- Owner's operating manual (8 pages) ,
- Owner's operating manual (10 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi ESS2414K
Summary of Contents for Ryobi ESS2414K
- Page 1 ESS2414RG / ESS2414K 1/4 SHEET SANDER OWNER’S OPERATING MANUAL...
- Page 2 DESCRIPTION 1. Switch 7. Dust bag 2. Paper clamp 8. Live tool indicator 3. Cushion 9. Base 4. Tab 10. Non-adhesive sandpaper 5. Lever 6. Dust bag frame Fig. 1 Fig. 2 Fig. 3...
- Page 3 Fig. 4...
- Page 4 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
-
Page 5: General Power Tool Safety Warnings
operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b. Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in electric will reduce personal injuries. -
Page 6: Specifications
It is recommended that this tool always be supplied via g. Use the power tool, accessories and tool bits a residual current device with a rated residual current etc., in accordance with these instructions and of 30mA or less. in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. -
Page 7: Operation
NOTE: Hook and loop type sanding discs can be reused FEATURES for the life of the sanding abrasive. It is recommended that Your sander is suitable for sanding with coarse, medium, you keep the sanding disc backing pad clean to provide for and fi... -
Page 8: Maintenance
wears sanding disc and greatly reduces sander speed. air to fl ow through the dust collection box better. Always Excessive pressure will overload the motor causing empty and clean the dust collection box thoroughly upon possible damage from motor overheating and can result in completion of a sanding operation and before placing the inferior work. - Page 9 the fi berglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommend using the tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.
- Page 10 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 20140522...