operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b. Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in electric will reduce personal injuries.
It is recommended that this tool always be supplied via g. Use the power tool, accessories and tool bits a residual current device with a rated residual current etc., in accordance with these instructions and of 30mA or less. in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
2. Align holes in hook and loop type sanding disc with FEATURES holes in pad, then carefully press the fuzzy side of Your sander is suitable for sanding with coarse, medium, sanding disc against the pad as tightly as possible. and fi...
Do not force. The weight of the unit supplies adequate For more effi cient operation, empty the dust collection pressure, so let the sanding disc and sander do the work. box when it is no more than half full. This will permit the Applying additional pressure only slows the motor, rapidly air to fl...
Page 9
spackling compounds, plaster subject accelerated wear and possible premature failure because the fi berglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommend using the tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.