Intrusion Switch; Removing The Intrusion Switch - Dell OptiPlex Small Form Factor 7010 Owner's Manual

Steps
1. Slide the power button into the slot on the chassis.
2. Connect the power button cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs) 71