Dell OptiPlex Small Form Factor 7010 Owner's Manual page 53

About this task
The following image indicates the location of the optical drive and provides a visual representation of the installation procedure.
Steps
1. Slide the optical drive into the disk-drive cage until it snaps into place.
2. Install the single (M2x2) screw to secure the optical drive from the disk-drive cage.
Next steps
1. Install the 3.5-inch hard drive
2. Install the 2.5-inch hard drive
3. Install the disk-drive cage.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in
if applicable.
if applicable.
After working inside your computer.
Removing and installing Customer Replaceable Units (CRUs) 53