Table of Contents
Advertisement
12 Overview
Feature key
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Key 10
Key 11
1.3.2.1 Autoscroll
It is possible to invoke an option known as Autoscroll. Enabling autoscroll
allows the Etherset to display an active feature even if it was on a different
page when activated.
To enable autoscroll, see Section 4.3, "Labelling feature keys".
1.3.3
Softkeys
The softkeys provide a simple way for users to navigate through the Etherset's
extensive menu system. The softkeys are labelled in the Etherset display
screen directly above each of the softkeys.
In some cases, there may be more than four options for a particular menu. In
this case, menu options can be scrolled one at a time using the left and right
navigation keys. (See Figure 1.)
Version 1.8
Note: Feature key 1 is never scrolled and is always associated with the
lower right-hand green key.
Note: The feature keys will be configured with a specific feature
template by your service provider as part of the installation procedure. For
the purposes of this document, the feature key assignment shown in
Table 1 will be assumed. However, this interface will vary depending on
the feature template configured by your service provider.
Table 1
Feature key assignment
Primary Dialled Number
Unassigned
Forward
Transfer
Speed Call
Message Waiting
Ring Again
Call Park
Time and Date
Auto Dial
Inspect
Feature Key assignment
August 2002
Advertisement
Table of Contents
