How To Ride Your Bike - Bajaj JOMINAR 250 BS VI 2021 Manual

Gear
shifting
Lever
1. Starting The Engine
• Turn ignition switch key to '
• Put kill switch in'
• Confirm that transmission is in neutral / press the
clutch lever if transmission is in gear.
• Keep throttle closed & press starter button,
• Release starter button as soon as engine starts.
"Cranking ON and OFF duration" control –
Cranking ON-OFF duration control feature to avoid
battery discharge-
- 1st Crank ON (5 sec) & Disable for 2 sec.
- 2nd Crank ON (5 sec) & Disable for 2 sec.
- 3rd Crank ON (5 sec) & Disable for 10 sec. After a
gap of 10 sec cranking cycle continues.
18
All manuals and user guides at all-guides.com
6
5
4
3
2
N
1
Gear shifting pattern
' position.
'position.

How to Ride Your Bike

Incase of battery discharged condition, vehicle will
start by push start.
The motorcycle is equipped with a clutch switch.
This switch ensures that the engine can be
started in any gear if the clutch lever is pressed.
2. Shifting Gears
• Close throttle & depress the clutch lever.
• Shift into next higher or lower gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
3. Moving Off
• Check that side stand is up.
• Depress the clutch lever.
st
• Shift into 1 gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
• As the clutch starts to engage, open the
throttle a little more, giving the engine
just enough rpm to keep it from stalling.