Bajaj JOMINAR 250 BS VI 2021 Manual page 12

Table of Contents

Advertisement

4.
Trip Meter : Trip 1 & Trip 2 shows the
distance traveled since it was last reset to
zero. Rolls over to zero after 999.9 km &
continue updating.
5.
Mode Button : Mode button used for
changing the mode while selecting & setting
Trip1, Trip2, ODO, Clock & Service reminder.
6.
Neutral Indicator : When the transmission
is in Neutral, Neutral indicator will glow.
7.
Low Oil Pressure Indicator (
when engine oil pressure is low.
8.
Turn Signal Indicator (LH & RH) : When
Turn signal switch is pushed to Left or Right,
Turn Signal Indicator - LH or RH will flash.
9.
Digital Clock : It indicates time in HR : MM
(AM/PM)
After switching 'ON' the ignition switch, the following indications will remain 'ON' till engine is started.
Coolant Temperature Indicator | Low Battery Indicator | L ow Oil Pressure | Malfunction Indicator
8
All manuals and user guides at all-guides.com
10. Fuel Level Indicator: It shows approximate fuel
11. Low Fuel Level Indicator : It blinks incase of
12. Speedometer : Vehicle speed will be displayed in
13. Set Button : Set button used for setting Clock
14. Engine RPM Limit : It blinks when engine RPM
) : It glows
level in fuel tank.
low fuel level (1 bar or less)
digital form in Km / Hr.
& Service reminder.
is more than 9500 RPM.
Within initial 2000Kms running (RUNNING IN period)
• RPM limit indicator blinks @ 6700 to 7000 RPM
• RPM limit indicator continuously glows if RPM
is>7000 km.
Beyond 2000 kms running –
• RPM limit indicator blinks @ 9200 to 9500 RPM
• RPM limit indicator continuously glows if RPM is >
9500 km

Advertisement

Table of Contents
loading

Table of Contents